In the latest version of FieldLink, you’ll find features and enhancements that improve a variety of workflows for prefabrication, in-field scan inspections, and more easily sharing information between field and office. FieldLink 7.0 adds functionality that helps a wide range of users, while also adding specific capabilities to help enhance Prefabrication workflows. This includes a range of enhancements that make project management much smoother and easier to navigate. In prefabrication scenarios, measurements must be relative to model dimensions and in FieldLink v7.0
KEY UPDATES
3D Model Transformations
As an improvement to the existing model transformation tool, users can now leverage a 3 Point transformation workflow to easily scale and rotate one model to match another in 3 dimensions, allowing users to match the coordinate system of the model objects in the project.
T10x (2024) Hardware Support
To extend the range and stability of connection to the Ri, users can now use external bluetooth dongles as an augmented connection source to the Ri. Connecting via bluetooth extends the Ri’s connection range to 300 meters (984 feet).
Note: Parani-UD100 Bluetooth dongle (4.0 Class 1 USB Adapter, Exchangeable antenna) ○ The dongle can be purchased online - Amazon or Sena
• Use of the bluetooth dongle disables camera use of the Ri
Aim Laser To Scan Point From Information Button
In previous versions of FieldLink, users would be required to perform a floor analysis and turn the laser to the generated grid points to mark out high and low points. Now in FieldLink v7.0, users have the ability to turn the instrument laser to a desired point of interest directly in the point cloud by using the information button. This, in conjunction with the elevation view of the point cloud, allows users to quickly identify high and low points and turn the instrument laser to a point of interest.
LAYOUT FEATURES & ENHANCEMENTS
3D Model Transformations
As an improvement to the existing model transformation tool, users can now leverage a 3 Point transformation workflow to easily scale and rotate one model to match another in 3 dimensions, allowing users to match the coordinate system of the model objects in the project.
Retain Station Setup Between Jobs
Users can now navigate between layout jobs, within the same project, while retaining their Total Station, GNSS and Scanning setup, avoiding the need to re-setup.
Save PDF Reports to Trimble Connect
FieldLink v7.0 allows users to save their field reports to Trimble Connect in PDF format.
SCANNING FEATURES & ENHANCEMENTS
Aim Laser to Scan Point from Information Button
In previous versions of FieldLink, users would be required to perform a floor analysis and turn the laser to the generated grid points to mark out high and low points. Now in FieldLink v7.0, users have the ability to turn the instrument laser to a desired point of interest in the point cloud from the information button. This, in conjunction with the elevation view of the point cloud, allows users to quickly identify high and low points and turn the instrument laser to a point of interest.
Auto Zero Floor Elevation for Scans
Rather than have the scan elevation be with respect to the instrument, FieldLink v7.0 will automatically detect the floor and define it as the zero elevation if the user desires.
HARDWARE UPDATES
R780-2 GNSS Support
FieldLink v7.0 offers support for the updated R780-2 GNSS receiver, including the dual-frequency smart radio antenna.
For more information contact your local Trimble sales representative.
Comments
0 comments
Please sign in to leave a comment.