1. Verify if Trimble Installation Manager (TIM) Is Already Installed?
-
- Click on the Windows icon in the lower left hand corner of the screen
- Scroll down to the 'T's
-
Look for Trimble Installation Manager
- Option A.) If TIM is not there, follow the guide linked below. Then move on to the step 2.
- Option B.) If Trimble Installation Manager is installed, move on to step 2
2. Install Trimble Field Points

-
-
-
- Be sure Controller is selected (Green Box)
-
Be sure Trimble Field Points is selected (Blue Box)
- If it is not visible, check Show all (Yellow Box)
- DO NOT select Trimble Field Points (RLM)
- Trimble Field Points Subscription will be visible (Orange Box)
- Use the drop down carrot to select the version {Year} (Red Box)
- Uncheck the options not desired
- Click on Install
- Accept all of the default
-
-
3. Activate your TFP License in AutoCAD/Revit
-
-
-
-
-
- Open the AutoCAD/Revit version for which Trimble Field Points was installed.
- Open or start a new job
- Click on Trimble Field Points in the ribbon
- Sign in with the email address that the license is assigned to
-
-
-
-
*(Note that users must be activated and assigned before this step. Please refer to Setting Up Your Trimble Software Subscriptions Guide here.
Comments
0 comments
Please sign in to leave a comment.